da | 30.163 | mm | |
Da | 71.999 | mm | |
Ca | 26.797 | mm | |
A1 | 50.8 | mm | |
A2 | 82.55 | mm | |
S | 4.763 | mm | |
ba | 21.431 | mm | |
H | 98.822 | mm | |
H1 | 50.8 | mm | |
H2 | 20.637 | mm | |
J | min. | 142.875 | mm |
J | max. | 155.575 | mm |
L | 190.5 | mm | |
N1 | 15.875 | mm | |
Threaded holes | |||
R1 | 23.813 | mm | |
R2 | 12.7 | mm | |
RG | 1/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 22.225 | mm |
Housing |
SAF 507
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-7-6
|
|||
Labyrinth ring |
2 x LER 14
|
|||
|
End plug (suffix Y) |
EPR 2
|
Bearing limiting speed | 13000 | r/min |
P60° | 18.2 | kN | |
P90° | 11.1 | kN | |
P120° | 6.81 | kN | |
P150° | 6.09 | kN | |
P180° | 7.25 | kN | |
Pa | 1.78 | kN |
Mass pillow block | 3.95 | kg |
Cap bolt |
2 x 3/8-16 UNC
|
|||
Cap bolt recommended tightening torque | 40.7 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.5 | in | |
Initial grease fill | 36.855 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
1200 VL R | 1090 | - | - | Seals |
---|---|---|---|---|
16960 | 42.8752 | 72 | 11.91 | Seals |
22252 CCK/W33 | 260 | 480 | 130 | Bearings, units and housings |
240/750 BC | 1090 | 335 | Bearings, units and housings | |
50148 | 127 | 165.1 | 12.7 | Seals |
61906 | 30 | 47 | 9 | Bearings, units and housings |
HK 4020.2RS | 40 | 47 | 20 | Bearings, units and housings |
NA 4822 | 110 | 140 | 30 | Bearings, units and housings |
NJ 230 ECML | 150 | 270 | 45 | Bearings, units and housings |
OKTC 790 | - | 1130 | - | |
SAFS 23056 KA x 10.7/16 | 265.1125 | - | - | Bearings, units and housings |
W 6205-2RS1/VP311 | 25 | 52 | 15 | Bearings, units and housings |
Hot number:
24052 CC/W33
319181/HB2
470561
53420 M + U 420
91303
BTW 140 CM/SP
H 2305
KRVE 90 PPA
LM 272235/210
NNU 41/500 K30M/W33
PRM 10010595
PWM 303630
SYR 1 3/4-18
SIKB 14 F
SSAFS 22528 x 4.7/8 TLC
Previous:SAF 1322 TLC Bearings, units and housings ---- Next:SAF 1507 T Bearings, units and housings
Return to SKF bearing