da | 28.575 | mm | |
Da | 71.999 | mm | |
Ca | 26.797 | mm | |
A1 | 50.8 | mm | |
A2 | 153.988 | mm | |
S | 4.763 | mm | |
ba | 21.431 | mm | |
H | 98.822 | mm | |
H1 | 50.8 | mm | |
H2 | 20.637 | mm | |
J | min. | 142.875 | mm |
J | max. | 155.575 | mm |
L | 190.5 | mm | |
N1 | 15.875 | mm | |
Threaded holes | |||
R1 | 23.813 | mm | |
R2 | 12.7 | mm | |
RG | 1/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 22.225 | mm |
Housing |
SAF 507
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-7-6
|
|||
Taconite seal | TER 13 | |||
|
End plug (suffix Y) |
EPR 2
|
Max. speed for Taconite seal | 2250 | r/min |
P60° | 18.2 | kN | |
P90° | 11.1 | kN | |
P120° | 6.81 | kN | |
P150° | 6.09 | kN | |
P180° | 7.25 | kN | |
Pa | 1.78 | kN |
Mass pillow block | 3.95 | kg |
Cap bolt |
2 x 3/8-16 UNC
|
|||
Cap bolt recommended tightening torque | 40.7 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.5 | in | |
Initial grease fill | 36.855 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
22x47x8 CRW1 R | 22 | 47 | 8 | Seals |
---|---|---|---|---|
24192 ECAK30/W33 | 460 | 760 | 300 | Bearings, units and housings |
25x32x7 CRSA1 R | 25 | 32 | 7 | Seals |
35x58x10 HMSA10 RG | 35 | 58 | 10 | Seals |
401104 | 99 | - | - | Seals |
5926 | 15.0876 | 28.55 | 7.95 | Seals |
FY 2.3/16 TF/VA228 | 55.562 | - | 64.4 | Bearings, units and housings |
NU 314 ECJ | 70 | 150 | 35 | Bearings, units and housings |
S7011 CB/HCP4A | 55 | 90 | 18 | Bearings, units and housings |
SY 1.7/16 TF | 36.512 | - | - | Bearings, units and housings |
SY 60 FM | 60 | - | - | Bearings, units and housings |
W 625 R-2RZ | 5 | 16 | 5 | Bearings, units and housings |
Hot number:
1450242
20148
44x60x8 CRW1 R
50x70x10 HMS5 V
61230
BA1B 311585
BT4B 331259 BG/HA1C325
FSAF 1216
GEH 20 C
HK 0606
HK 3016
OKCX 460
SAF 23028 KA x 4.15/16
W 61909 R-2Z
SYK 35 TR
Previous:SAF 1507 x 1.1/8 Bearings, units and housings ---- Next:SAF 1509 Bearings, units and housings
Return to SKF bearing