da | 28.575 | mm | |
Da | 71.999 | mm | |
Ca | 26.797 | mm | |
A1 | 50.8 | mm | |
A2 | 82.55 | mm | |
S | 4.763 | mm | |
ba | 21.431 | mm | |
H | 98.822 | mm | |
H1 | 50.8 | mm | |
H2 | 20.637 | mm | |
J | min. | 142.875 | mm |
J | max. | 155.575 | mm |
L | 190.5 | mm | |
N1 | 15.875 | mm | |
Threaded holes | |||
R1 | 23.813 | mm | |
R2 | 12.7 | mm | |
RG | 1/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 22.225 | mm |
Housing |
SAF 507
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-7-6
|
|||
Labyrinth ring |
2 x LER 13
|
|||
|
End plug (suffix Y) |
EPR 2
|
Bearing limiting speed | 13000 | r/min |
P60° | 18.2 | kN | |
P90° | 11.1 | kN | |
P120° | 6.81 | kN | |
P150° | 6.09 | kN | |
P180° | 7.25 | kN | |
Pa | 1.78 | kN |
Mass pillow block | 3.95 | kg |
Cap bolt |
2 x 3/8-16 UNC
|
|||
Cap bolt recommended tightening torque | 40.7 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.5 | in | |
Initial grease fill | 36.855 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
1319 K | 95 | 200 | 45 | Bearings, units and housings |
---|---|---|---|---|
13427 | 34.0106 | 48.9966 | 8.001 | Seals |
13568 | 34.925 | 50.8 | 7.95 | Seals |
33022 | 110 | 170 | 47 | Bearings, units and housings |
37340 | 95.25 | 114.3254 | 9.652 | Seals |
71828 ACD/P4 | 140 | 175 | 18 | Bearings, units and housings |
FSAF 1517 x 2.13/16 TLC | 71.4375 | - | - | Bearings, units and housings |
IR 130x145x35 | 130 | 145 | 35 | Bearings, units and housings |
K 60x68x20 | 60 | 68 | 20 | Bearings, units and housings |
NU 210 ECPH | 50 | 90 | 20 | Bearings, units and housings |
NUP 2214 ECP | 70 | 125 | 31 | Bearings, units and housings |
SAF 22536 x 6.5/16 TLC | 160.3375 | - | - | Bearings, units and housings |
Hot number:
16893
18x30x7 HMSA10 RG
2050542
BD-24044 CCK30/W33-AOH 24044
24120-2RS5/VT143
33011
34857
404502
46155
7024 CB/P4AL
FY 30 WDW
K 150x160x46
RNAO 70x90x30
S7020 ACD/HCP4A
SAL 50 ES-2RS
Previous:SAF 1507 x 1.1/4 T Bearings, units and housings ---- Next:SAF 1507 x 1.1/8 T Bearings, units and housings
Return to SKF bearing