da | 28.575 | mm | |
Da | 71.999 | mm | |
Ca | 26.797 | mm | |
A1 | 50.8 | mm | |
A2 | 153.988 | mm | |
S | 1.984 | mm | |
ba | 24.606 | mm | |
H | 98.822 | mm | |
H1 | 50.8 | mm | |
H2 | 20.637 | mm | |
J | min. | 142.875 | mm |
J | max. | 155.575 | mm |
L | 190.5 | mm | |
N1 | 15.875 | mm | |
Threaded holes | |||
R1 | 23.813 | mm | |
R2 | 12.7 | mm | |
RG | 1/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 22.225 | mm |
Housing |
SAF 507
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
36053-6
|
|||
Taconite seal | TER 14 | |||
|
End plug (suffix Y) |
EPR 2
|
Max. speed for Taconite seal | 2250 | r/min |
P60° | 18.2 | kN | |
P90° | 11.1 | kN | |
P120° | 6.67 | kN | |
P150° | 5.78 | kN | |
P180° | 7.12 | kN | |
Pa | 2.4 | kN |
Mass pillow block | 4.15 | kg |
Cap bolt |
2 x 3/8-16 UNC
|
|||
Cap bolt recommended tightening torque | 40.7 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.5 | in | |
Initial grease fill | 19.845 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
240/630 ECJ/W33 | 630 | 920 | 290 | Bearings, units and housings |
---|---|---|---|---|
22411 | 57.15 | 79.38 | 14.3 | Seals |
230/950 CAK/W33 | 950 | 1360 | 300 | Bearings, units and housings |
51112 | 60 | 85 | 17 | Bearings, units and housings |
6009-2RS1 | 45 | 75 | 16 | Bearings, units and housings |
6312 | 60 | 130 | 31 | Bearings, units and housings |
7000 ACE/HCP4A | 10 | 26 | 8 | Bearings, units and housings |
7450 | 19.05 | 31.75 | 6.35 | Seals |
FYR 2 1/2-18 | 63.5 | - | - | Bearings, units and housings |
P 40 | - | - | - | Bearings, units and housings |
PFT 25 TF | 25 | - | - | Bearings, units and housings |
S71917 ACB/P4A | 85 | 120 | 18 | Bearings, units and housings |
Hot number:
11225
1318
3308 A-2Z
40x62x8 HMS5 RG
6256 M
AXW 50
FYTWK 1.3/8 YTH
GEZM 600 ES-2RS
NCF 28/500 V
NJ 2222 ECML
NX 30 Z
RNA 4924
RNA 6917
S7016 CB/P4A
SY 25 TDW
Previous:SAF 22507 x 1.1/8 Bearings, units and housings ---- Next:SAF 22509 Bearings, units and housings
Return to SKF bearing