da | 66.675 | mm | |
Da | 140 | mm | |
Ca | 42.799 | mm | |
A1 | 88.9 | mm | |
A2 | 209.55 | mm | |
S | 4.763 | mm | |
ba | 34.131 | mm | |
H | 169.863 | mm | |
H1 | 88.9 | mm | |
H2 | 31.75 | mm | |
J | min. | 244.475 | mm |
J | max. | 279.4 | mm |
L | 330.2 | mm | |
N1 | 22.225 | mm | |
Threaded holes | |||
R1 | 53.181 | mm | |
R2 | 21.431 | mm | |
RG | 3/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 31.75 | mm |
Housing |
SAF 516
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-16-13
|
|||
Taconite seal | TER 43 | |||
|
End plug (suffix Y) |
EPR 8
|
Max. speed for Taconite seal | 1150 | r/min |
P60° | 83.2 | kN | |
P90° | 49.8 | kN | |
P120° | 30.2 | kN | |
P150° | 26.7 | kN | |
P180° | 31.6 | kN | |
Pa | 7.83 | kN |
Mass pillow block | 16.3 | kg |
Cap bolt |
2 x 5/8-11 UNC
|
|||
Cap bolt recommended tightening torque | 203.4 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.75 | in | |
Initial grease fill | 87.885 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
17907 | 45.0088 | 67.0052 | 8.001 | Seals |
---|---|---|---|---|
2315 K | 75 | 160 | 55 | Bearings, units and housings |
24188 ECAK30/W33 | 440 | 720 | 280 | Bearings, units and housings |
719/9 ACE/P4AH | 9 | 20 | 6 | Bearings, units and housings |
87451 | - | - | 50.8 | Seals |
AOH 3144 | 200 | 220 | 145 | Bearings, units and housings |
C 3130 K | 150 | 250 | 80 | Bearings, units and housings |
H 3024 | 110 | 145 | 72 | Bearings, units and housings |
KM 36 | 27 | - | 180 | Bearings, units and housings |
NCF 3096 CV | 480 | 700 | 165 | Bearings, units and housings |
SAL 80 ESX-2LS | 80 | - | 55 | Bearings, units and housings |
W 61907 | 35 | 55 | 10 | Bearings, units and housings |
Hot number:
1313 ETN9
22338-2CS5/VT143
22368
239/630 CAK/W33
3310 A-2Z
33207T64/DB
51312
6302
7305 BEGBP
7030 CD/P4A
90x110x7.50 HMSA7P2 R
NA 4910.2RS
SAF 23038 KAT x 6.15/16
SYJ 2.1/2 TF
W 60/1.5
Previous:SAF 22516 x 2.5/8 Bearings, units and housings ---- Next:SAF 22516 x 2.5/8 TLC Bearings, units and housings
Return to SKF bearing