da | 107.95 | mm | |
Da | 215.001 | mm | |
Ca | 67.793 | mm | |
A1 | 120.65 | mm | |
A2 | 254 | mm | |
S | 4.763 | mm | |
ba | 53.181 | mm | |
H | 257.175 | mm | |
H1 | 133.35 | mm | |
H2 | 53.975 | mm | |
J | min. | 336.55 | mm |
J | max. | 368.3 | mm |
J1 | 69.85 | mm | |
L | 419.1 | mm | |
N1 | 22.225 | mm | |
Threaded holes | |||
R1 | 79.375 | mm | |
R2 | 30.163 | mm | |
RG | 1/2 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 46.831 | mm |
Housing |
SAF 524
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-24-20
|
|||
Taconite seal | TER 114 | |||
|
End plug (suffix Y) |
EPR 14
|
Max. speed for Taconite seal | 725 | r/min |
P60° | 185 | kN | |
P90° | 111 | kN | |
P120° | 72.5 | kN | |
P150° | 66.7 | kN | |
P180° | 81.4 | kN | |
Pa | 20.7 | kN |
Mass pillow block | 47.2 | kg |
Cap bolt |
2 x 1-8 UNC
|
|||
Cap bolt recommended tightening torque | 799.9 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.75 | in | |
Initial grease fill | 379.89 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
52x68x8 HMS5 RG | 52 | 68 | 8 | Seals |
---|---|---|---|---|
623 | 3 | 10 | 4 | Bearings, units and housings |
71911 CB/HCP4A | 55 | 80 | 13 | Bearings, units and housings |
89312 TN | 60 | 110 | 30 | Bearings, units and housings |
990x1045x25 HDS1 R | 990 | 1045 | 25 | Seals |
BSA 209 C | 45 | 85 | 18 | Bearings, units and housings |
D/W R4A-2RZ | 6.35 | 19.05 | 7.142 | Bearings, units and housings |
FYK 40 TR | 40 | - | - | Bearings, units and housings |
KRV 26 B | - | 26 | 12 | Bearings, units and housings |
OKC 430 | 430 | - | ||
SAF 22615 x 2.3/8 | 60.325 | - | - | Bearings, units and housings |
SNP 3192x17 | 431.8 | 539.877 | 314.1472 | Bearings, units and housings |
Hot number:
1150253
12612
BD-23138-2CS5K/VT143-H 3138
24072 CCK30/W33
29925
48x70x8 CRW1 R
52210
63x85x10 HMS5 RG
7013 CB/P4A
BC2B 320117/HA4
NCF 3030 CV
SAFS 22217
SHT 19
SHT 70
W 638/5 R-2Z
Previous:SAF 22524 x 4.1/4 Bearings, units and housings ---- Next:SAF 22524 x 4.1/4 TLC Bearings, units and housings
Return to SKF bearing