da | 44.45 | mm | |
Da | 110 | mm | |
Ca | 50.8 | mm | |
A1 | 69.85 | mm | |
A2 | 190.5 | mm | |
S | 5.556 | mm | |
ba | 34.925 | mm | |
H | 147.637 | mm | |
H1 | 76.2 | mm | |
H2 | 28.575 | mm | |
J | min. | 196.85 | mm |
J | max. | 228.6 | mm |
L | 269.875 | mm | |
N1 | 19.05 | mm | |
Threaded holes | |||
R1 | 42.862 | mm | |
R2 | 19.05 | mm | |
RG | 1/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 34.925 | mm |
Housing |
SAF 610
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-0-10
|
|||
Taconite seal | TER 21 | |||
|
End plug (suffix Y) |
EPR 4
|
Max. speed for Taconite seal | 1800 | r/min |
P60° | 39.1 | kN | |
P90° | 23.6 | kN | |
P120° | 14.2 | kN | |
P150° | 12.9 | kN | |
P180° | 15.6 | kN | |
Pa | 5.96 | kN |
Mass pillow block | 10.7 | kg |
Cap bolt |
2 x 1/2-13 UNC
|
|||
Cap bolt recommended tightening torque | 149.1 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Appropriate attachment bolt size | G | 0.625 | in | |
Initial grease fill | 53.865 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
28760 | 73.025 | 101.68 | 11.13 | Seals |
---|---|---|---|---|
300x340x18 HDS1 D | 300 | 340 | 18 | Seals |
63x85x10 HMSA10 V | 63 | 85 | 10 | Seals |
7021 ACD/HCP4AL | 105 | 160 | 26 | Bearings, units and housings |
AH 24034 | 160 | 170 | 106 | Bearings, units and housings |
FYTJ 45 TF | 45 | - | - | Bearings, units and housings |
HM 31/500 | 80 | - | 500 | Bearings, units and housings |
NCF 3092 CV | 460 | 680 | 163 | Bearings, units and housings |
OH 3996 H | 450 | 480 | 200 | Bearings, units and housings |
PSM 354535 A51 | 35 | 45 | 35 | Bearings, units and housings |
SIR 25 ES | 25 | - | 20 | Bearings, units and housings |
SNL 3068 TURA | 320 | - | - | Bearings, units and housings |
Hot number:
BD-240/850 ECAK30/W33-AOH 240/850 G
21210
2305 E-2RS1TN9
240/1060 CAK30F/W33
32x45x7 HMS5 V
3645
538266
625/HR11QN
6321-Z
HME 30/750
NA 2208.2RSX
NNCF 4980 CV
QJ 1032 N2MA
SAW 23538 x 6.7/8
W 61705 R
Previous:SAF 22610 x 1.3/4 Bearings, units and housings ---- Next:SAF 22610 x 1.5/8 Bearings, units and housings
Return to SKF bearing