da | 61.913 | mm | |
Da | 130 | mm | |
Ca | 37.008 | mm | |
A1 | 79.375 | mm | |
A2 | 193.675 | mm | |
S | 3.175 | mm | |
ba | 32.544 | mm | |
H | 161.925 | mm | |
H1 | 82.55 | mm | |
H2 | 30.163 | mm | |
J | min. | 215.9 | mm |
J | max. | 247.65 | mm |
J1 | 47.625 | mm | |
L | 285.75 | mm | |
N1 | 15.875 | mm | |
Threaded holes | |||
R1 | 46.038 | mm | |
R2 | 21.431 | mm | |
RG | 1/4 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 28.575 | mm |
Housing |
FSAFS 515
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-15-0
|
|||
Taconite seal | TER 37 | |||
|
End plug (suffix Y) |
EPR 7
|
Max. speed for Taconite seal | 1250 | r/min |
P60° | 54.3 | kN | |
P90° | 32.5 | kN | |
P120° | 20 | kN | |
P150° | 18.2 | kN | |
P180° | 22.2 | kN | |
Pa | 6.67 | kN |
Mass pillow block | 15.4 | kg |
Cap bolt |
2 x 1/2-13 UNC
|
|||
Cap bolt recommended tightening torque | 102 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.5 | in | |
Initial grease fill | 68.04 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
18000 | 45.9994 | 89.9922 | 16.002 | Seals |
---|---|---|---|---|
250x280x15 HMSA10 V | 250 | 280 | 15 | Seals |
2700558 | 685.8 | 736.6 | 20.65 | Seals |
33017 | 85 | 130 | 36 | Bearings, units and housings |
524928 | 279.4 | - | - | Seals |
525637 | 603.25 | - | - | Seals |
6356 M | 280 | 580 | 108 | Bearings, units and housings |
91326 | - | - | 25.4 | Seals |
FY 1.7/16 TDW | 36.512 | - | - | Bearings, units and housings |
PCM 556025 E | 55 | 60 | 25 | Bearings, units and housings |
PWM 404830 | 40 | 48 | 30 | Bearings, units and housings |
W 6006-2RZ | 30 | 55 | 13 | Bearings, units and housings |
Hot number:
1209 EKTN9
14x24x7 HMS5 V
209-2ZNR
29252
305 VRME R
60/1060 MB
6006/HR11QN
7084 AM
HJ 234 EC
N 1014 KTNHA/HC5SP
NCF 2332 ECJB/PEX
NJ 2311 ECP
SAF 23028 KAT x 4.13/16
SNLN 3024
YAR 205-100-2RF
Previous:SAFS 22515-11 Bearings, units and housings ---- Next:SAFS 22515-11 TLC Bearings, units and housings
Return to SKF bearing